Stainless Steel Fasteners

Stainless Steel Fasteners

  Product Name Unit Price  
Product Name: Land Rover Defender Stainless Steel Light Lens Screws

Contains : 17 x A2 stainless steel screws

Suitable for : All Defenders up to vin no MA939976 

For light lenses which are fastened to the backing plate but do not hold the unit to the body.
Enough screws to replace all front and rear lense screws + 1 spare

Please check these are the correct ones for your vehicle before ordering.
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£1.48 exc VAT
(£1.78 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender Stainless Steel Light Lens Screws

Kit contains 17 x A2 stainless steel screws

Suitable for : All Defenders From vin no MA939976

Suitable for later Land Rover Defender models 90 +110 + 130 were the screws go right through the lense, backing plate and into the body in one go. 
Enough screws to replace all front and rear lense screws + 1 spare

Please check these are the correct ones for your vehicle before ordering.
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£1.49 exc VAT
(£1.79 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender Headlight Surround Stainless Steel Screws

Kit contains : 12 x A2 stainless steel screws

Suitable for : Land Rover Defender models 90 +110

This kit is suitable for all Defender models, on the earlier vehicles you will need all 12 ( 6 per panel ) screws on the later models will only require 4 ( 2 per panel ) 
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£1.33 exc VAT
(£1.59 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90 110 130 Stainless Wing Vent screws

Kit contains: 14 x A2 Grade stainless steel screws

Suitable for : All Land Rover Defender 90 110 130 models
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 
Please Note these are our regular replacement wing vent screws if you have wing vents fitted over chequer plate you will need our longer wing vent screws also listed.

Unit Price:

£1.49 exc VAT
(£1.79 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Def 90 110 130 Stainless Steel Wing Vent screws Long

Kit contains: 14 x A2 Grade stainless steel screws
Suitable for : All Land Rover Defender 90 110 130 models
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive.

Please Note these are our extra long repalcement wing vent screws for vehicles where the wing vents are fitted over chequer plate, they will also fit in place of regular ones where the wing vents are flush to the wing, we also have regular ones listed .

Unit Price:

£1.57 exc VAT
(£1.89 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90 110 Stainless Steel Front Grille Screws

Kit contains 8 x A2 stainless steel Screws + 8 optional washers (included)
Suitable for : All Land Rover Defender 90 110 130 models
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. Included in this kit is 8  stainless steel washers so you can reduce stress on the grille mounting points. 
Take about 5 minutes to do, but look far more attractive. 

 

Unit Price:

£1.66 exc VAT
(£1.99 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender A2 Stainless Steel Bonnet Bolts

Kit contains : 6 x A2 stainless steel counter sunk bolts, nuts & washers optional washers 
Suitable for : All Land Rover Defender 90 110 130 models.
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit.

Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£1.66 exc VAT
(£1.99 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover 90 110 Defender S/Steel Rear Fog, Reverse Light & Reflector Screws

Kit contains: 11 x A2 stainless steel screws.

Suitable for : Land Rover Defender models 90 +110 early models with square fog and reversing lamps.

This Kit contains all the screws you need to replace the following, Rear fog, reverse, number plate lights, reflectors & number plate screws as well.

These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£1.17 exc VAT
(£1.40 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender S/Steel Rear Fog, Reverse Light & Reflector Screws Late

Kit contains: 11 x A2 stainless steel screws.

Suitable for : Land Rover Defender models 90 +110 Late models with round fog and reversing lamps.

This Kit contains all the screws you need to replace the following, Rear fog, reverse, number plate lights, reflectors & number plate screws as well.
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£1.17 exc VAT
(£1.40 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90, 110, 130 A2 Stainless Steel Multi Screw Kit

Kit contains : 5 Popular Lines

Suitable For : All Defenders up to vin no MA939976 

Short Lens Screws: 17 x  A2 stainless steel screws
Suitable for Series 3 & early Land Rover Defender models 90 +110 were the screws only hold the lense, to the backing plate.Enough screws to replace all front and rear lense screws + 1 spare

Headlight Panel Surround Screws: 12 x A2 stainless steel screws, suitable for all Series 3 & Defender models, on the earlier vehicles you will need all 12 ( 6 per panel ) screws on the later models will only require 4 ( 2 per panel )

Wing Vent Screws: 14 x A2 Grade stainless steel screws, standard length, if you need longer ones please email with payment and we can swap them for you (free of charge).

Front Grille Screws: 8 x A2 stainless steel Screws + Included in this kit are 8  stainless steel washers so you can reduce stress on the grille mounting points.

Bonnet Bolts: 6 x A2 stainless steel counter sunk bolts, nuts & washers. 

We also have a kit listed with longer headlight screws for later Defenders

These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£4.99 exc VAT
(£5.99 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90, 110, 130 A2 Stainless Steel Multi Screw Kit

Kit contains : 5 Popular Lines

Sitable for : all Defenders from vin no. MA939976

Long Lens Screws: 17 x A2 stainless steel screws. Suitable for later Land Rover Defender models 90 +110 were the screws go right through the lense, backing plate and into the body in one go. 
Enough screws to replace all front and rear lense screws + 1 spare

Headlight Panel Surround Screws: 12 x A2 stainless steel screws, suitable for all Series 3 & Defender models, on the earlier vehicles you will need all 12 ( 6 per panel ) screws on the later models will only require 4 ( 2 per panel )

Wing Vent Screws: 14 x A2 Grade stainless steel screws, standard length, if you need longer ones please email with payment and we can swap them for you (free of charge).

Front Grille Screws: 8 x A2 stainless steel Screws + Included in this kit are 8  stainless steel washers so you can reduce stress on the grille mounting points.

Bonnet Bolts: 6 x A2 stainless steel counter sunk bolts, nuts & washers. 

We also have a kit listed with shorter headlight screws for earlier Defenders

  
These are a straight forward direct exchange for the normal mild steel and probably rusty screws which Land Rover fit. 
Take about 5 minutes to do, but look far more attractive. 

Unit Price:

£4.99 exc VAT
(£5.99 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90,110, 130 Front Door Bolts A2 Stainless Steel

 Kit Contains : 16 heavy duty socket cap bolts, 8 lock nuts & washers.

Suitable for : Land Rover Defender models 90 +110 + 130

These are a straight forward direct exchange for the normal mild steel and probably rusty bolts which Land Rover fit & look far more attractive. If changing from imperial threaded bolts you will also need a set of J nuts as well.


 

Unit Price:

£5.83 exc VAT
(£6.99 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90,110, 130 2nd Row Door Bolts A2 Stainless Steel

Kit contains : 16 heavy duty socket cap bolts, 8 lock nuts & washers.

Suitable for : Land Rover Defender models 90 +110, 130 

These are a straight forward direct exchange for the normal mild steel and probably rusty bolts which Land Rover fit & look far more attractive. If changing from imperial threaded bolts you will also need a set of J nuts as well.

Unit Price:

£8.33 exc VAT
(£9.99 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender Stainless Steel Rear Door Bolts

Kit contains : 12 x A2 stainless steel socket cap bolts, lock nuts & washers

Suitable for : All Land Rover Defender 90, 110 & 130 models

These are a straight forward direct exchange for the normal mild steel and probably rusty bolts

which Land Rover fit.

 

Unit Price:

£4.49 exc VAT
(£5.39 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90, 110,130 Rear Crossmember Bolts A2 Stainless Steel

Kit contains : 10 x Socket cap bolts, nuts and washers

Suitable for : Land Rover Defender 90, 110 and 130 models.

These are a direct repalcement for your old or rusty bolts and look great.

This kit is set up to cover several L R models so you might find you have some spare nuts and washers.

Unit Price:

£3.96 exc VAT
(£4.75 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90, 110, 130 A2 Stainless Steel 3 Door Bolt & Fittings Kit

Kit contains: All exterior nuts bolts screws and washers over 220 parts for all 2 / 3 door vehicles .

Suitable for : All Land Rover Defender 90, 110 and 130 models.

Including.

Front door bolts

Rear door (safari) bolts

Rear cross member bolts

Bonnet hinge bolts

Light lens screws (early & late)

Surround screws

Grille screws

Wing vent screws (short & long types)

Fog, reverse, reflector & number plate screws (square & round types)

Over 220 parts all in A2 Grade Stainless Steel.

Please note:

Due to the fact that this kit fits both early and late models you will end up with a few spares

Unit Price:

£20.79 exc VAT
(£24.95 inc VAT)

Website currently closed for maintenance thanks for looking.

Product Name: Land Rover Defender 90, 110, 130 A2 Stainless Steel 5 Door Bolt & Fittings Kit 250pc

Kit contains: All exterior nuts bolts screws and washers over 250 parts for all 4 / 5 door vehicles .

Suitable for : Land Rover Defender 90, 110 and 130 models.

Including.

Front door bolts

2nd row (passenger) door bolts

Rear door (safari) bolts

Rear cross member bolts

Bonnet hinge bolts

Light lens screws (early & late)

Surround screws

Grille screws

Wing vent screws (short & long types)

Fog, reverse, reflector & number plate screws (square & round types)

Over 250 parts all in A2 Grade Stainless Steel.

Please note:

Due to the fact that this kit fits both early and late models you will end up with a few spares

Unit Price:

£24.96 exc VAT
(£29.95 inc VAT)

Website currently closed for maintenance thanks for looking.